Entering Coordinates - Alpine X409-WRA-JK Installation Manual

3.1.6 Entering coordinates

To select a destination by entering its coordinates, perform the following steps:
1. Press the navigation hardkey button to access the Navigation menu.
2. Tap .
3. You can enter the latitude and longitude values in any of the following formats: decimal
degrees, degrees and decimal minutes, or degrees, minutes and decimal seconds. Tap
(optional) If necessary, tap
the coordinate in UTM format.
Tip!
4. The route is calculated and the map appears showing the entire route, where you can check
route information and route alternatives. Tap
parameters, or tap
.
to start your journey.
then
40
and enter
to modify the route