Running A Simulation - Alpine X409-WRA-JK Installation Manual

3.7 Running a Simulation

To run a simulated navigation that demonstrates the planned route, perform the following steps:
1. Press the navigation hardkey button to access the Navigation menu.
2. In the Navigation menu, tap
3. Tap
4. Tap
you through the whole planned route using a realistic speed.
(optional) You have the following controls during the simulation (the control buttons disappear
after a few seconds but you can open them again if you tap the map):
•
: Jump to the next route event (maneuver).
•
: Pause the simulation.
•
: Jump to the previous route event (maneuver).
•
: Tap to increase the speed of the simulation to 4, 8 or 16 times faster. Tap again
to return to normal speed.
.
.
. The simulation starts from the starting point of the route and leads
56