Setup; Setup Operation; Wireless (Bluetooth) Setup - Alpine X409-WRA-JK Installation Manual

Setup

Setup Operation

To display the Setup Menu screen:
Your vehicle must be parked with the ignition key in the ACC or ON
position. To do this, follow the procedures below.
1 Bring your vehicle to a complete stop at a safe location.
Engage the parking brake.
2 Release the parking brake. (For safety, release the parking
brake while depressing the foot brake pedal).
3 Engage the parking brake again.
• For automatic transmission vehicles, place the transmission lever in
the Park position.
Now, the locking system for the Setup operation has been released.
Engaging the parking brake can reactivate the Setup Menu, as long as
the car's ignition has not been turned off. It is not necessary to repeat
the above procedure (1 through 3) of "To display the Setup Menu
screen. "
Each time the ignition is turned OFF, perform the procedure of "To
display the Setup Menu screen. "
1
Press the MENU button.
The Menu screen is displayed.
• Touch [ ] will return to previous source screen.
2
Touch [Setup].
The Setup main screen is displayed.
3
Touch the required setting icon on the upper part of the
Setup main screen or swipe the list area vertically, then
touch the setting item.
Setting items:
Wireless: See "Wireless (Bluetooth) Setup" (page 28).
General: See "General Setup" (page 31).
Source: See "Source Setup" (page 41).
System: See "System Setup" (page 44).
28
-EN
[Setup] button

Wireless (Bluetooth) Setup

[Wireless] is selected on the Setup main screen in step 3. See "Setup
Operation" (page 28).
Wireless Setup Menu screen
<Setting items>
Bluetooth
1/2
Bluetooth Information*
1/2
Set Bluetooth Device*
Hands-free Device Priority*
1/2
iPhone Auto Pairing*
Device
Passcode Change
Default Phone Book Format
Phone Speaker
Microphone Select (X308U/INE-W987HD olny)
*1 This setting is only available when "Bluetooth" is set to "On" (
*2 Cannot be adjusted when Apple CarPlay is used/Android smartphone
which installed Android Auto App is connected.
The following steps 1 to 3 are common to each "Setting
item" of Wireless Setup. See each section for details.
1
Select the desired item.
2
To switch the setting, touch [ ], [ ], [ ], [ ], or mark the
checkboxes "Off"( ) or "On"(
• If " " appears, there is a further hierarchy. Touch the desired
item.
3
Touch [ ] to return to the main source screen.
• To return to the previous List screen, touch [ ] in the previous
page. For details, see "About Basic Operation for List Screen"
(page 18).
1/2
).
).