Off-Road Mode; Switching To Off-Road Mode; Off-Road Mode Screen - Alpine X409-WRA-JK Installation Manual

For jeep wrangler
Table of Contents

Advertisement

5.
Tap
to stop the simulation.

3.8 Off-Road Mode

When first started, Alpine Navigation System calculates routes using the map road network provided
with the product. If you want to disregard roads during navigation, you can switch to Off-Road mode,
for example when driving in a desert.

3.8.1 Switching to Off-Road Mode

To switch to Off-Road navigation, perform the following steps:
1.
Press then release the menu hard key
2.
Press then release the Off-Road mode button
Most of the procedures described for On-Road navigation also apply to Off-Road navigation.
However, there are some features not available in the Off-Road navigation mode. For example:
You cannot open the itinerary as you have no maneuvers just route points and straight lines
between them.
There are no route alternatives and route planning method. Vehicle settings are disabled

3.8.2 Off-Road Mode screen

You can record, backtrack, save and import your favorite ride.
Record [Start]
You can record a new ride by selecting the [Map] button then [Record] button
on the map. The navigation system will mark the tracked ride on the map in
red color while recording is ongoing.
57

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the X409-WRA-JK and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents