Table of Contents
Advertisement
IMPORTANT SAFETY INSTRUCTIONS
Proper installation: Make sure that your appliance has been in-
stalled correctly and that it has been grounded by a qualified techni-
cian.
Before connecting the appliance to the power supply, ensure that
the connection data on the data plate (voltage and frequency) match
the power supply.
This data must correspond in order to avoid the risk of damage to
the appliance. Consult a qualified electrician if in any doubt.
Do not use an extension cord to connect this appliance to the
power supply. Extension cords do not guarantee the required safety
of the appliance.
Maintain the required minimum installation height of 36" (914 mm).
For safety reasons, this appliance may only be used after it has
been built in.
This steam oven must not be used in a non-stationary location
(e.g. on a ship).
Risk of injury due to electric shock. Any contact with live connec-
tions or tampering with the electrical or mechanical components of
the oven will endanger your safety and may lead to the steam oven
malfunctioning.
Do not open the steam oven housing under any circumstances.
While the appliance is under warranty, repairs should only be per-
formed by a Miele-authorized service technicians. Work by unquali-
fied persons could be dangerous and may void the warranty.
Defective components should be replaced by Miele original parts
only. Only with these parts can safety of the appliance be assured as
intended by the manufacturer.
If the electrical plug is removed from the power cord or if the
power cord is supplied without an electrical plug, the steam oven
must be connected to the electricity supply by a qualified service
technician.
12
Advertisement
Table of Contents
