Cable Service With Vcr - Zenith Concierge H19D34Y Installation And Operating Manual, Warranty

Cable Service (CATV) with VCR Hook Up
Connect a VCR and Cable service to the Concierge TV
Locate the Antenna/Cable jack on the back
1
of the VCR.
2
Connect the cable service wire that runs
from the wall, according to one of the dia-
grams to the right. Make other connections
as needed.
3
Remove the back of the remote and put in
two AA batteries.
4
Plug in the TV. Do not plug it into a
switched outlet. The Concierge TV is
designed to operate on standard current,
120-volt 60 Hertz AC. Do not attempt to
operate it on DC power.
5
Go to page 11 to Auto Program the TV.
Leave the VCR and the television tuned to channel
three and use the cable box to change channels.
No A/V cables are included with the TV.
Model H25D39Y does not have an MPI card.
206-3490-O
back of
remote
Cable TV
Wall Jack
RF Coaxial Wire
TV Back
ANTENNA
CABLE
Super
Port
VIDEO SPEAKER
IN OUT
M.P.I.
AUDIO
IN
TV Back Panel
(Expanded View)
Cable TV
Wall Jack
In
Out
RF Coaxial Wire
TV Back
ANT ENN A
CAB LE
Super
Port
VIDEO SPEAKER
M.P.I.
IN OUT
AUDIO
IN
TV Back Panel
(Expanded View)
VCR Back
VCR Back AV Panel
output
switch
In
Video
(75ohm)
Out
A/V Cables
Not included
with TV
Cable box
output
VCR Back
switch 3 4
VCR Back AV Panel
output
switch
In
Video
(75ohm)
Out
A/V Cables
Not included
with TV
3 4
Audio
3 4
Audio
P A G E 9