Auto Program (Channel Search)
Use Auto Program to specify Antenna or cable service
incoming signal source and automatically store all of the
channels that are found by channel search
1
Using an Installer remote control, press the POWER key to
turn on the Concierge TV.
2
Press the MENU key so the SETUP MENU appears.
3
Using SELECT on the remote control, highlight AUTO
PROGRAM on the screen.
4
Press the Right or Left ADJ (Adjust) arrow to go to the
Auto Program menu.
5
Using SELECT, choose either CABLE TV or OFF AIR ANTENNA
on your screen.
6
Press the Right or Left ADJ arrow key to begin the Channel
Search.
7
Press ENTER when the channel search is complete.
Note: Auto Program finds channels being received by the TV
tuner.
Cable will not work unless the lodge provides a cable service.
Mini glossary
OFF AIR ANTENNA
If the guest can only view over-the-air broadcasts, select Antenna.
CABLE
If you provide cable service to your guests, select Cable.
206-3599-O
1
1
2
4
5
7
8
0
TIMER
MENU
SELECT
3/5
ADJ
4/6
3
6
9
ENTER
7
2
ALARM
CH PREVIEW
ADJ
P A G E 1 1