Table of Contents
Advertisement
General instructions on property damage and product damage | A36VM
Leakage or spilling of hydraulic fluid!
Risk of environmental pollution and contamination of ground water!
▶ Always place a drip tray under the axial piston unit when filling and draining
hydraulic fluid.
▶ Use a suitable binding agent to collect any leaked hydraulic fluid.
▶ Observe the safety data sheet for the hydraulic fluid and the specifications
provided by the machine/system manufacturer.
Danger due to heat development in components!
Nearby products can be damaged! Components which heat up (e.g., solenoids)
can cause damage to nearby products if they are too close during installation.
▶ When installing the axial piston unit, check the safety distances to nearby
products to ensure that they are not damaged.
The warranty only applies to the machine configuration as delivered.
The warranty will be voided if the product is incorrectly installed, commissioned or
operated, or if it is used or handled improperly.
NOTICE
RE 91650-01-B/2021-07-19, Bosch Rexroth AG
17/54
Advertisement
Table of Contents
