Download Print this page

Meccanica Benassi FOX 110-4WD User And Maintenance Manual page 20

Advertisement

Page 20 of 36 
 
pedal, it is ESSENTIAL to unlock the parking brake! To do this, gently press the brake pedal forward =>
lever #2 comes out its locking position and can return to its rest position => release the brake and, with
the same foot (i.e. right foot), choose the travel direction.
NEVER ACTIVATE THE TRAVEL DIRECTION PEDAL WHILE THE PARKING BRAKE
IS ENGAGED: this can cause irreversible damage to the rear hydrostatic
 
  
It is useful to remember, as it has been done several times in this manual, that an incorrect
maintenance or performed by unauthorized workshops can expose the user to serious injury
risks or technical faults not covered by the warranty.
Safety warnings:
All maintenance operations must be carried out with engine off, ignition key disengaged, parking brake
engaged, and machine parked on a surface able to support it properly.
- Moreover, check if there are people nearby.
- Make sure that the machine cannot drift for any reason.
- Keep always in mind the risks connected to the use of fuel (fire and vapour inhalation) and pay
attention to the presence of sharp tools.
- In the event the machine must be tilted on one side or lifted, attach the bands directly to the
frame or to the front bumper hose. NEVER LIFT the machine from its protection bar and NEVER LIFT
using the anchor points for transport (shown in
- During most maintenance operations, keep the engine off and remove the ignition key. The only
operation for which the engine must be on is the rotor washing, which is carried out using the
sleeve supplied (explanation of the procedure in
- Allow the machine to cool down before acting on any of its parts. Engine, transmissions and rear
metal covers tend to retain heat for several minutes after the machine has been turned off:
therefore, it is necessary to pay attention.
- It is essential to carry out the correct disposal of petrol, oil and other special waste (such as the
battery), observing the regulations in force in the territories where the machine is used and
maintained. Do not dispose of them in the environment and do not treat them as regular waste.
 
 
FUEL
The tractor is supplied with the fuel needed for its unpacking and first start-up. To use the machine, it is
necessary to fill the petrol tank. The tank can contain up to 13.2 litres approximately. Note: the machine is
not equipped with a reserve tap nor with indicator lights for fuel level. Keep this in mind and act accordingly.
► The only type of allowed fuel is the one having the characteristics described below. Any other type of fuel
might damage the engine and makes any engine-related warranty claim immediately void. 7d. Fuel must be
kept in fresh, dry places, away from light and ignition sources, in approved containers suitable for this
purpose.
 
transmission!
7a – MAINTENANCE AND CLEANING
7b – FUEL, HYDROSTATIC OIL, ENGINE OIL
Chap.4b).
Chap. 7c 3).
35451480EN ‐ FOX 110‐4WD and FOX 95‐4WD User and Maintenance Manual 

Advertisement

loading

This manual is also suitable for:

Fox seriesFox 95-4wd