Advertisement
Page 11 of 36
4b – PACKAGING, TRANSPORT, SAFE MOVEMENT
FOX
The
tractor is delivered on pallets in a rigid box.
The machine is supplied with:
- this machine manual, containing the EC
Declaration of Conformity on its last page;
Briggs & Stratton
-
engine manual
- ignition key;
- sleeve for rotor washing (screwed into the side of
the casing and ready for a rubber hose)
Check the integrity of the packaging when the machine is delivered!
If the packaging was damaged during transport, report it IMMEDIATELY, accept the delivery with reserve
and document everything taking pictures. The manufacturer is not responsible for damages occurred
during transport.
The machine is delivered ready to be used but without the petrol tank full; therefore:
- with the engine oil at the correct level. Check it anyway, see
- with a minimum amount of petrol, to be used to move the machine outside the packaging: fill up
as soon as possible, see
- with the hydrostatic transmissions (and external tank) already filled with oil. Check anyway the
level in the tank using the cap, as described in
- with battery charged but to be connected (first the positive + pole, then the negative -);
- with tires at the ideal pressure (in any case, perform a check as described in
The machine can be moved both when it is on and off, more specifically:
- WHEN THE ENGINE IS OFF, it is possible to:
- push the machine, on a flat terrain (for few metres), unlocking the rear hydrostatic
transmission as described in paragraph
- in case of engine failure, move the tractor using a winch suitable for towing this machine
(i.e. approved for masses equal to at least 400 kg) by attaching the ropes to the supports
highlighted in the figure below. First unlock the hydrostatic transmission!
;
! IMPORTANT !
CHAP.7b.
CHAP.7b
CHAP 7b.
;
11 – By-pass lever
CHAP. 6A.
of
35451480EN ‐ FOX 110‐4WD and FOX 95‐4WD User and Maintenance Manual
;
CHAP 5
)
Advertisement
