Video / Audio Configuration - Comelit IPFCAMA12FA Manual

Backlight Compensation (BLC):

Off: disables the backlight compensation function (default).

HWDR: WDR can adjust the camera to provide a better image when there are
both very bright and very dark areas simultaneously in the field of the view by lowering
the brightness of the bright area and increasing the brightness of the dark area.
Recording will be stopped for a few seconds while the mode is changing from
non-WDR to WDR mode.

HLC: lowers the brightness of the entire image by suppressing the brightness of
the image's bright area and reducing the size of the halo area.

BLC: if enabled, the auto exposure will activate according to the scene so that the
object of the image in the darkest area will be seen clearly.
Antiflicker:

Off: disables the anti-flicker function. This is used in outdoor installations.
 50Hz: reduces flicker in 50Hz lighting conditions.

60Hz: reduces flicker in 60Hz lighting conditions.
White Balance: adjust the color temperature according to the environment
automatically.
Frequency: 50Hz or 60Hz.
Day/Night Mode: choose "Auto", "Day", "Night" or "Timing".
Sensitivity: high, middle or low.
Infra-red Mode: choose "Auto", "ON" or "Off".
Exposure Mode: choose "Auto" or "Manual". If manual is chosen, the digital shutter
speed can be adjusted.

3.2.2 Video / Audio Configuration

Go to ImageVideo / Audio interface as shown below. In this interface, set the
resolution, frame rate, bitrate type, video quality and so on.
Click the "Audio" tab to go to the interface as shown below.
You can select streams for different channels.
16