Table of Contents
Advertisement
App Encryption Enabled. If enabled, connection with the Comelit View Smart app is
encrypted.
6.4 Video
On the main screen, click "Configuration → Video" to access the relevant page, which can be
used to set video, audio and other functions.
6.4.1 Video
On the main screen, click "Configuration → Video → Video" to access the relevant page,
which can be used to set the name of the IPC device, the stream type, the encoding and
other video parameters, as shown in figure 6-20:
Device Name. Enter the name of the camera.
Stream Type. This may be Single / Tri-Stream.
Codec. Select the encoding type and resolution.
H265+/H264+. Enable/Disable H.265+/H.264+ codec.
Framerate. Set the frame rate for the device video output.
.
Bitrate
Supports 64-12000 kbps. The higher the bitrate, the better the video quality will be,
but the greater the network bandwidth occupied will be.
Figure 6-20
35
Advertisement
Table of Contents
