Icom IC-M15 Instruction Manual page 17

Mi Starting a scan
2) Push and hold [SCAN] for 2 seconds.
e "SCAN" appears in the function display.
e When a signal is detected, scan pauses until the signal disap-
pears. (Ch 16 is still monitored during priority scan.)
3) To stop the scan, push [SCAN].
e "SCAN" disappears.
e Pushing [16], [C}] or [MEMO] also stops the scan.
Push [16], [C]
or [MEMO} to
select a regular
channel if nec-
essary.
SCAN
USA
Push for 2 secs. Scan starts
So oe
SCAN FUNCTIONS 6
channel or a memory channel).
¢ Channel 16 or the call channel CANNOT be locked out.
3) To unlock a channel, repeat
regular channel
locked out.
Scan pauses when receiving a Push to stop the
signal and audio is emitted. scan.
SCAN
14