Icom IC-M15 Instruction Manual page 12

3 BASIC OPERATION
i Receiving
1) Rotate [VOL] clockwise to turn power ON.
2) Rotate [SQL] fully counterclockwise.
3) Adjust the audio to a suitable level using [VOL].
4) Rotate [SQL] clockwise until audio noise is just muted.
5) Rotate [CHANNEL] to set the desired channel for receiv-
ing.
e When receiving a signal, appears and audio is emitted
from the speaker.
[VOL] Adjust audio
control volume while [SQL]
is max. CCW.
[CHANNEL]
selector
[SQL]
control
i Dual watch/tri-watch
This function monitors channel 16 (and the call channel in
the case of tri-watch) while waiting on a selected channel.
Set the transceiver for tri- or dual watch in SET mode
depending on your preference. (See p. 12.)
1) Set your desired receive channel. See p. 8.
@ If the call channel is selected, only dual watch is possible.
2) Push [DUAL] to activate the
watch.
e When a signal is received on
Ch 16 the watch pauses until the
signal disappears.
e When a signal pauses on the call
channel, Ch 16 is still monitored.
3) Push [DUAL] to cancel the
watch.
if 1c sis
Ww 1 i
Lt a
rie Pie
nol no
Dual watch Tri-watch