Icom IC-M15 Instruction Manual page 14

© To program: © To program:
1) Push [MEMO] to select a memory channel.
1) Push [C] to select the call channel.
11
2) While pushing [HI/LOW], push
[MEMO*MW].
e "MEMO" and the memory channel
number flash.
3) Rotate [CHANNEL] until the de-
sired memory appears.
4) Push [MEMO] again.
e Channel number flashes.
5) Rotate [CHANNEL] until the de-
sired channel appears.
6) While pushing [HI/LOW], push
[MEMO-MW] to complete pro-
gramming.
e Channel number stops flashing.
2) While pushing [HI/LOW], push
[C].
e The call channel flashes.
3) Rotate [CHANNEL] until the de-
sired channel appears.
4) While pushing [HI/LOW], push
[C] again to complete program-
ming.
e The cali channel stops flashing.