DESKTOP INSTALLATION
11
Place the desk frame assembly on top of the underside of your desktop. Extend the
entire assembly to the appropriate length to suit your desktop. As a guide, a 5-10cm
of gap between the edge of the desk and the wing is acceptable; they should be the
same on both sides of the desk.
Re-tighten the 4 grub screws of the spreader bar that were loosened earlier using
Allen key 1.
Ensure all 4 corners of the desk frame are evenly spaced to the edge of the desk. This
will ensure the desk frame is perfectly centered for optimum stability.
Even
spacings
5 - 10cm
10