UpDown Desk PRO Series Install Manual page 4

04
The bag of bolts/screws/Allen keys (#5) is a generic package covering several desk
models. If you discover any screws beyond what is described in this setup manual, you
may consider them spares.
M8 x 10mm - 10 pieces in total - large Allen Key required (supplied - Allen Key #1) -
Used to attach the legs to the Wings (b)(c) and Spreader Bar (a).
M8 x 20mm - 8 pieces in total - large Allen Key required (supplied - Allen Key #1) -
Used to attach Feet (g) to the Legs (f).
Self Tapping - 16mm - 6 pieces in total - Phillips head screwdriver required (not
supplied) - Used to attach the desktop to the frame.
Crank handle clamp & self tapping screws - 1 x Crank Handle Clamp & 2 x self tapping
screws - Used to hide away the handle when not in use.
Allen Keys & Grub Screws - 4 x Allen Keys (left to right is largest to smallest), 2 x Crank
Assembly grub screws (1 x spare ) 2 x Crank Handle grub screws ( 1 x spare ).
04