UpDown Desk PRO Series Install Manual page 18

19
The Crank Handle Clamp (found in the bag with screws and bolts) can now be
installed. You will need
2 x Self tapping screws
1 x Crank Handle Clamp
To determine where to put the clamp, fold the Crank Handle (d) inwards (like in the
image below). From there align the clamp with the thick part of the handle. With a
pencil, mark the screw holes of the clamp. Then using the two self tapping screws
provided, fix the clamp to the pencil marks that you had made.
18