Download Print this page

Kraus KGD-433B Installation Manual page 15

Granite kitchen sink
Hide thumbs Also See for KGD-433B:

Advertisement

4. Install Sink / Installation de l'évier
·
Turn the sink upside down. Align the sink with the cutting line on the counter.
·
Retourner l'évier. Aligner l'évier avec la ligne de découpe du comptoir.
Using a pencil, mark 10 spots around the frame at a distance of about 1/4" (6.4mm) from the edge
·
of the sink.
À l'aide d'un crayon, marquer 10 points autour du cadre à une distance d'environ 6,4 mm (1/4")
·
du bord de l'évier.
·
For a solid installation, it is recommended that all 10 mounting clips are used.
·
Pour une installation solide, il est recommandé d'utiliser les 10 brides de fixation.
·
Use 15/64" drill bit to drill the fixation holes at a depth of 3/8" in the indicated location.
·
Utiliser une mèche de 15/64" pour percer les trous de fixation à une profondeur de 3/8" à
l'endroit indiqué.
·
Insert the brass inserts by tapping them into the holes, split end first.
·
Insérer les garnitures en laiton en les tapant dans les trous, en commençant par l'extrémité
fendue.
·
Thoroughly clean the top portion of the sink edge. Clean underneath the counter and around the
cutting line using denatured alcohol.
Nettoyer soigneusement la partie supérieure du bord de l'évier. Nettoyer sous le comptoir et
·
autour de la ligne de coupe en utilisant de l'alcool dénaturé.
Apply a small quantity of silicone-based sealant (not included) around the cutting line, 1/8" away
·
from the edge of the counter.
·
Appliquer une petite quantité d'agent d'étanchéité à base de silicone (non inclus) autour de la
ligne de coupe, à une distance de 1/8" du bord du comptoir.
·
Align the sink and fix the mounting clips as shown. Firmly tighten the screw into the brass insert.
·
Aligner l'évier et fixer les brides de fixation comme indiqué. Serrer fermement la vis dans la
garniture en laiton.
·
Once the sink is correctly installed, tighten the wing nuts to fix it into place.
·
Une fois l'évier correctement installé, serrer les écrous à oreilles pour le fixer en place.
·
Complete the installation of the counter.
·
Terminer l'installation du comptoir.
Remove any excess sealant on the inside of the bowls.
·
·
Retirer tout excès d'agent d'étanchéité à l'intérieur des cuvettes.
15

Advertisement

loading