Midea MAW08U1QWT User Manual page 29

SET Function
• Press the SET button to enter the function setting, then press SET button or TEMP
the desired function. The selected symbol will fl ash on the display area, press the OK button to confi rm.
• To cancel the selected function, just perform the same procedures as above.
• Press the SET button to scroll through operation function as follow:
→
Sleep ( ) C SENSE (
C SENSE Function (
The C SENSE function enables the remote control to measure the temperature at its current location and send
this signal to the air conditioner in 3 minutes intervals. When using AUTO or COOL modes, measuring ambiente
temperature from the remote control (instead of from the indoor unit itself) will enable the air conditioner to
optmize the temperature around you and ensure maximum comfort.
AP Function ( ):
Choose AP mode to do wireless network confi guration. For some units, it doesn't work by pressing the SET
button. To enter the AP mode, continuously press the LED button 7 times in 10 seconds.
Sleep Function ( ):
The SLEEP function is used to decrease energy use while you sleep (and don't need the same temperature
settings to stay comfortable). This function can only be activated via remote control.
Press the Sleep button to initiate the sleep mode. In this mode the selected temperature will increase (in cooling
mode) by 2°F (1°C) 30 minutes after the mode is selected.
This new temperature will be maintained for 7 hours before it returns to the originally selected temperature.
This ends the Sleep mode and the unit will continue to operate as originally programmed. The Sleep mode
program can be canceled at any time during operation by pressing the Sleep button again.
NOTE
It is only available in COOL mode.
Declaration of Conformity
We hereby declare that this AC is in compliance with the essential requirements and other relevant provisions of
Directive 1999/5/EC.
Specifi cation of Wireless Module
Model: US-SK109
Antenna Type: Printed PCB Antenna
WLAN 2400-2483.5 MHz
Frequency:
Maximum Transmitted Power: <20 dBm Max
→
) AP mode (
):
)
Dimensions: 1.6 x 0.9 x 0.2 (in)
Operation Temperature: 0°C ~ 45°C / 32°F ~ 113°F
Operation Humidity: 10% ~ 85%
Power Input: DC 5V/500 mA
29
or TEMP to select