Midea MAW08U1QWT User Manual page 21

Air Conditioner Features
ELECTRONIC CONTROL OPERATING INSTRUCTIONS
Before you begin, thoroughly familiarize yourself with the control panel as shown below and all its functions,
then follow the symbol for the functions you desire. The unit can be controlled by the control panel, remote
control, smart phone app or voice control.
3 4
1 ON / OFF
2 Connect Function
3 Swing
Energy Saver Feature /
4
Check Filter Feature
5 Fan Speed
6 UP / DOWN Button
7 Mode Fuctions
8 FlashCool Function
1. ON/OFF Button
Press ON/OFF button to turn unit on or off.
2. CONNECT Button
When connecting your air conditioner to Wireless
Connection, press the POWER button for 3 seconds
to initiate the Wireless Connection mode. The display
shows 'AP' to indicate the unit is in the Wireless
Connection mode. Refer to the Connect section for
further instructions.
If connection (router) is successful within 8 minutes, the
unit will exit Wireless Connection mode automatically
and the CONNECT indicator illuminates.
If connection failed within 8 minutes, the unit exits
Wireless Connection mode automatically and the
CONNECT indicator does not illuminate.
LED Display
5 6
Description
• Press to turn unit on or off.
• Press and hold for 3 seconds to initiate smart connection mode.
• Press to initiate the auto swing feature.
• Press to initiate this feature, which will maintain comfort and
save energy.
• Press for 3 sec to turn off the cleaning fi lter reminder.
• Press to select the Fan Speed in four steps - Auto, Low, Med
or High.
• Press to change temperature setting.
• Press to choose operating mode in a sequence that goes from
Auto, Cool, Dry and Fan.
• Press to turn FlashCool on or off.
6 7
After Wireless connection is successful, you can
press and hold POWER and DOWN (
at the same time for 3 seconds to turn off
CONNECT function and the LED DISPLAY shows
'OF' for 3 seconds, press POWER and UP (
buttons at the same time to turn on CONNECT
function and the LED DISPLAY shows 'On' for 3
seconds.
3. SWING Button
Use the SWING button to initiate the auto swing
feature for the outlet louver. When the auto
swing is on, pressing the SWING button can
stop the louver at the desired angle.
21
8 1 2
) buttons
)