Advertisement
I WAKE UP FROM STANDBY_
j The set is woken up from the standby mode by pressing any
! key on the cassette deck (except DOLBY B/C 8, PLAY
! MODE 1 or one of the EJECT buttons) and by pressing TAPE
j on the remote control.
PLAYBACK_
The cassette deck has several options for the playback of a
tape.
Playback of one side (deck A or B)
• Press the EJECT button to open the cassette holder of the
corresponding deck.
• Insert a recorded cassette with the open side facing down¬
wards.
• Close the cassette holder.
• Press PLAY MODE 1 until the indicator HZ lights up.
• If desired, switch on the Dolby B/C noise reduction system
by pressing DOLBY B/C 8.
• Press PLAY ◄ or ► on the keyboard of the corresponding
deck or choose a deck with DECK A or DECK B, a direction
with ◄ ► (if necessary) and press PLAY on the remote con¬
trol.
The display shows the chosen deck, TAPE A or TAPE B.
The playing direction is shown by the direction indicators on
the cassette holders.
The deck plays one cassette side and the tape stops auto¬
matically at the end of a side.
• Press STOP ■ 2 (A) or 7 (B) or STOP on the remote control
to stop playback.
• Press PLAY ◄ or ► or PLAY on the remote control to restart
playback.
Playback of both sides (deck A or B)
If you want to play both sides of the cassette, proceed as
described under 'Playback of one side' but select cr with the
PLAY MODE selector 1.
The deck plays both sides of the cassette and the tape stops
automatically at the end of the second side of the tape.
Continuous playback with one cassette (deck A or B)
If you want to play one tape in one deck continuously, proceed
as described under 'Playback of one side' but select CD with
the PLAY MODE selector 1.
The selected deck keeps on playing both sides of the cassette
(up to a maximum of six times) until you press STOP ■ on the
playing deck or STOP on the remote control.
Continuous playback with two cassettes (deck A and B)
This option lets you play both sides of two cassettes continu¬
ously. When the first deck has played both sides of the cas¬
sette the deck switches to the second deck and starts playing
both sides of the cassette. After playing both sides of the cas¬
sette in the second deck it switches back to the first deck to
start again. Each cassette is played a maximum of three times.
• Insert a recorded cassette into both cassette holders as indi¬
cated above.
• Press PLAY MODE 1 until the indicator autoplay lights up.
• If desired, switch on the Dolby B/C noise reduction system
by pressing DOLBY B/C 8.
• Press PLAY ◄ or ► to start playback. It is possible to start
with deck A or B.
• Press STOP ■ 2 (A) or 7 (B) (depending which deck is play¬
ing) or STOP on the remote control to stop playback.
• Press PLAY ◄ or ► or PLAY on the remote control to restart
playback.
Notes:
- The two decks never play at the same time.
- It is also possible to change the play mode to autoplay
when one deck is already playing.
- The autoplay mode is not available if only one tape is insert¬
ed. The cassette deck automatically switches to CD mode.
AUTOMATIC TAPE DETECTION AND SELECTION_
The presence of a cassette in the cassette holder is detected.
When no cassette is inserted in the cassette holder, no tape
action can be started.__
When a cassette is inserted in the cassette holder, the deck
will always automatically select the tape type (NORMAL or
Cr02) as soon as the cassette holder is closed._
RECORDING (deck B only)_
Copyright
Recording or copying is only authorised if there is no violation of
copyright or other rights of third parties.
Note for users in the U.K.
Recording and playback of material may require consent See Copy¬
right Act 1956 and The Performers' Protection Acts 1958 to 1972
It is not possible to make a recording when the autoplay mode
is selected with PLAY MODE 1. The cassette deck will auto¬
matically switch to the mode for playback of both sides.
• Press EJECT to open the cassette holder of deck B.
• insert a cassette which is not protected against recording,
with the open side facing downwards.
• Close the cassette holder.
• If desired, switch on the Dolby B/C noise reduction system
by pressing DOLBY B/C 8.
• Select the sound source on your remote control or on the
system (for PHONO only on your amplifier) from which you
wish to make a recording.
• Press PLAY MODE 1 to select the play mode HZ or CT.
• Press RECORD PREPARED 6 to set deck B in the record-
pause mode.
The red RECORD indicator starts flashing.
• Press PLAY ◄ or ► to start the recording in the left or right
direction.
The red RECORD indicator lights up.
• Press the STOP ■ key to stop recording before the end of
the tape.
Notes:
- The system is equipped with an Automatic Level Control
(ALC). The record level is adjusted automatically and can not
be adjusted manually.
- Recording is only possible when deck A is not playing. Fast
winding of deck A to left or right is however possible.
- It is not possible to change the tape playing direction during
recording.
16
Advertisement
