Download Print this page

Maytag NEPTUNE MAH-1 Use & Care Manual page 15

Hide thumbs Also See for NEPTUNE MAH-1:

Advertisement

Available languages

Available languages

Q.
What's
the
best
cycle
to
use if I have stains
on my
laundry?
A.
Select
the
stain
cycle
option
pad and
heavy
soil
(see
page
4) setting.
Pretreat
the
stains
with
a laundry
pre-treat
product.
Refer
to the
enclosed
Laundering
Tips
booklet
for more
information
on treating
specific
stains.
Q.
How large of a load can I wash in my Maytag
Neptune ® washer?
A.
The tub can be loaded
completely
full with dry, unfolded
clothes.
However,
do not pack the tub tightly. If the load is heavily
soiled it is very important
not to overload
the washer.
Q.
At the end of the cycle my load comes out wetter
than normal.What
causes this?
A.
During tumble
and spin the washer
may have had difficulty getting to a full spin speed
because
the load was not evenly dis-
tributed.This
can occur with small loads, heavy items or a load in which too much detergent
was used, causing over-sudsing.
Q.
My laundry items seem to be very wrinkled
at the end of the cycle. What
can I do to correct
the problem?
A.
Wrinlding
is caused by the combination
of heat and pressure.
Be sure wrinlde
free or permanent
press fabrics are washed
on
the wrinkle
free
cycle, and
a cold rinse
is used.
(See
pg. 3 for WASH/RINSE
Temperature).
DO NOT USE MAX-
EXTRACT.
Q.
My whites
are not as white
as I'd like.What
can I do?
A.
Wash
white loads using the cotton/sturdy
fabric selection.
Select the hot wash/cold
rinse temperature
setting
and put 3/4
cup of chlorine
bleach in the bleach dispenser.The
bleach will be dispensed
in the final minutes
of the wash providing
for opti-
mal whitening.
Maytag recommends
a hot water wash temperature
of 120-140 ° F (49 °- 60 ° C).
14

Advertisement

loading