Maytag NEPTUNE MAH-1 Use & Care Manual page 13

HELP CODES
Help codes may be displayed to help you better understand what is occurring with the washer.
Code
Symbol Meaning Solution
_1 The washer detects
that the door is open when
Close the door tightly and restart the cycle.
_ZHZ_ starting a cycle or the door is not Iocldng.
Zl_ The washer failed to lock the door. Close the door tightly and restart the cycle.
Oversudsing has occurred. If this code disap- Reduce the amount of detergent used for that
pears, the suds recovery cycle was successful, specific load.
IZ[l Z
Restart
the cycle. If code is still displayed, check
The washer experienced a power failure.
to make sure power cord is securely plugged in.
Check for a I<inked drain hose.
The washer experienced difficulty draining. Check for a plugged stand pipe.
Make sure door is tightly closed. Push the Off
button and then wait two minutes for the door
to unlock.
The washer has repeatedly tried to unlock the
door but has been unsuccessful. OR
Unplug the washer for two minutes and plug
back in.
I_ Motor Call for service. See below.
not running
properly.
_ Nake sure the water faucets are open all the
_ The washer has tried to fill. way.
Check for Idnked hoses.
_[ The washer door must be opened. This is a safety feature. The door must be
_Z_ _Z_ opened before another
cycle is started.
For any codes not listed above, call Maytag Customer Assistance toll-free at
1-800-688-9900 USA or 1-800-688-2002 Canada.
U.S. customers usingTTY for deaf, hearing impaired or speech impaired,
call 1-800-688-2080.
12