Table of Contents
Advertisement
General Information
These instructions should be retained and made readily accessible by personnel using the appliance. The instructions should be read thoroughly
prior to appliance installation. Failing to follow the advice contained in this manual may result in damage to the appliance and personal injury
to the operator. All installations must conform to local and municipal regulations and directives. In case of doubt contact your Foster authorised
distributor or the Foster Technical Department. The information contained in this manual is current at the time of publication and is subject to
change without notice.
CAREFUL – DANGER
Ignoring this sign and remarks may result in personal danger.
CAREFUL – DANGER
Ignoring this sign and remarks may result in damage to your appliance.
INFORMATION
Useful hints to make the best use of your appliance.
RISK OF FIRE/FLAMMABLE MATERIALS
Specific precautions are required to prevent ignition.
Climate Class
Climate class indicated on the serial plate shows the ambient temperature & humidity at which this appliance has been tested, for the purposes of
establishing values in line with European standards.
Climate Class
5
General Safety
-
Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
-
Keep all ventilation openings in the appliance or in the structure of a built in unit clear of any obstructions.
-
Do not use electrical appliances inside the storage compartment.
-
Do not use steam cleaners, pressure washers or other jets/sprays of water on or around the appliance.
-
This appliance is heavy. When moving the appliance care should be taken and correct safe practices
followed. The appliance should not be moved over uneven surfaces.
-
The appliance should not be moved while loaded with product.
-
The appliance should not be moved using the doors as a hand hold or pulling point.
-
Due to the weight of the appliance and that of the product contained within it the appliance may leave indentations in some types of floor
coverings.
-
The emitted sound level of this appliance is not greater than 70dB(A).
-
To ensure stability the appliance should be located on a flat, level surface, correctly loaded.
-
Do not use mechanical devices to accelerate the defrost process.
-
Do not damage the refrigeration circuit.
-
If the supply cord is damaged, it must be replaced by the manufacturer, it's service agent or similarly qualified persons in order to avoid hazards.
-
Care should be taken to avoid prolonged contact with cold surfaces with unprotected body parts, correct PPE to be used at all time.
-
The handles on the rear of the appliance also serve to maintain an adequate space to the rear of the appliance required
for correct operation. These should not be removed.
EMD Multidecks - Service Manual
Temperature
40˚C
Relative humidity
40%
3
Advertisement
Table of Contents
