SETUP INSTRUCTIONS
The appliance will not work if:
The blender jar/dry mill is not properly and completely assembled.
Make sure the blender jar/dry mill is locked in position.
Fit the blender jar assembly (5)/ dry mill assembly (9) onto the motor
base (1), rotate the blender jar clockwise aligning the '' mark on the
side of the blender jar (5) to the '' mark on the front of the motor unit
(1).
Prepare food for blending:
• Wash all food items carefully.
• Some vegetables and fruits must be peeled. Such are oranges, tangerines, lemons,
mangos, kiwis, melons, pineapples, etc.
• If necessary, remove pits and stones (e.g., from cherries, prunes, apricots, peaches, etc.)
and pith (e.g., from apples, pears, etc.).
• Cut vegetables and fruits into small pieces (approximately 1.5 x 1.5 x 1.5cm).
• Very hard foods should be cut into small pieces and add water when blending.
6