Specification - Binatone BLG-415 Manual

SPECIAL SAFETY MEASURES
► Misuse of your blender can result in injury.
► Never leave the appliance unattended while plugged in or while switched on.
► Never attempt to remove any parts during the operation of the blender. Always wait until
the blade stops running, switch off and unplug the appliance before adding ingredients,
and disassembling or removing food from the blender jar or dry mill cup, or approaching
parts that moves in use.
► Never disassemble the blender jar or dry mill from the motor base while the power is on,
the motor is running, and the blades is moving.
► Avoid contact with moving parts. Never open the blender lid to put your hand or any
object in the jar while the blender is running.
► Switch the appliance on only when fully assembled. Before use, always check whether it
is assembled properly.
► Never turn on the appliance if the jar or dry mill is empty. The appliance cannot be used
without load or with too less ingredients or liquid which can damage the blender.
► Never blend hot liquids.
► Never switch off the appliance by turning the blender jar, the dry mill, or their lids. Always
switch off the appliance by turning the speed control to "0".
► The blade is fixed on the blender jar and dry mill cup. Do not remove or repair it by
yourself to avoid injury. This should only be done by authorized service centres.
► Never attempt to operate the blender or dry mill with damaged blades.
► Care should be taken when handling the sharp blades, emptying the blender jar and
during cleaning.
► Do not leave foreign objects, such as spoons, forks, knives, etc., in the blender jar as this
will damage the blades and may cause injury when starting the appliance.
► Always keep hands and utensils out of the blender to reduce risk of severe injury or
damage to the unit.
► Do not overfill the blender jar or the dry mill cup. This could cause damage to the motor.
► The blender jar is not suitable as a storage container. Do not leave ingredients to stand
inside it either before or after processing.
► Always use the spatula or spoon to remove foods from the blender jar or the dry mill cup
but only when the appliance is not running, avoid hands or fingers touching the sharp
blades.
► If a burning smell, strange sounds or lowered performance are noticed during operation,
unplug the blender immediately and clean it. If normal operation is not restored, contact
an authorized service center.

SPECIFICATION

Voltage: 220-240V~ 50/60Hz 300-350W
Capacity: 1.5L Blender Jar
50g Dry Mill
Rated working time :
Blender 60 seconds
Dry Mill 60 seconds
4