Care And Cleaning - Binatone BLG-415 Manual

CARE AND CLEANING

• Always turn the speed control (1) to the OFF - "0" position - then disconnect from the power outlet
and let it cool down to room temperature before cleaning, assembling and storage.
• Always clean the appliance and its accessories immediately after use so food won't dry on them.
• Wipe the base and power cord with a damp cloth after each use.
Note: Never immerse the motor base (1) and the power cord in water or any other liquids or place
them under running water.
• Do not use abrasive materials, alcohol, gasoline, etc., to clean the appliance.
• Empty the blender jar and the dry mill before washing them. Wash the jar, lid, filler cup and grinder
cup in soapy water. Rinse them then dry. Do not use any sharp or abrasive detergents.
If food sticks to the wall of the blender jar or the dry mill cup, use the spatula to remove the food
from the wall.
Note: Never use metal utensils, as damage may occur to the blender jar or the cutting blade.
• To clean the blender or dry mill blade, pour some warm soapy water into the blender jar (5) or dry
mill cup (8), close the blender lid (4) and lock onto the motor base (1). Use the Pulse mode until
they are clean. Detach the jar or dry mill and rinse it with clean water.
If the blades get stuck, use a brush to remove the foods that is blocking the blade. Then rinse
thoroughly under the tap. Leave to dry upside down.
Note: The blades are sharp. Handle them with precaution when cleaning.
• You may also put the blender jar, the lid, the filler cup and the grinder cup in the dishwasher for
cleaning.
• Some foods may discolour the plastic. This is normal and will not harm the plastic or affect the
flavour of your food. Rub with a cloth dipped in vegetable oil to remove the discoloration.
• Allow the blender and its parts to be dried thoroughly before reassembling or storage.
13