J+J J4C Series Handbook page 5

OPTIONS
DPS KIT
Digital Positioner System
Digital positioner for our J4C BSR system for our J4C models.
models. Instrumentation signal
4-20 mA, 0-20 mA, 0-10 V or
1-10 V.
This DPS digital positioner is The BSR system for our models
suitable for S and B models.
same but with a bigger capacity
Option assembled in Factory
KIT CONCEPT
The installation of the kit could be done at the factory or, if you prefer, do it by yourself. You could find the Instruction
Manual in our web site.
With this kit we make it easier for customers who have a Basic actuator to convert it into a more complete actuator.
Our distributors could have lower stock and quicker service.
LOWER STOCK
BSR KIT INTERFACE
Battery System Returns
Using the Interface KIT cable we
It is an emergency fail safe communicate with the actuator,
kit system by battery wich is read parameters and change the
common to S and B models. actuators configuration.
140 Nm and 300 Nm it is the
battery.
Option Self-Assembling
BLUETOOTH
KIT
We have introduced the Bluetooth
Interface System
communication system in
our actuators, in order to
communicate with our actuators,
from any Android devices. This
system appears in our catalogue
as a factory option. From our
mobile phone or tablet we could
order our actuator to open/close
FAST SERVICE
HANDBOOK
MODBUS
Modbus System
• Plug and play
• Each device could be operated
manually.
• Could be seen from the control
panel PC.
• Fast and flexible, starting by 3
or stop.
actuators up to 255.
• Up to 1.200 m distance range.
5
Index