Table of Contents
Advertisement
Acute warning
If actuation of the turn
indicators on the side
corresponding to the lit-up
warning triangle indicates
an imminent lane change,
warning triangle 1 flashes
because a safe lane change is
not possible.
If the
Urgent only
ting is selected, only the
acute warning with a flashing
warning triangle is issued.
For more information on
lane change warning see the
"Engineering details" section
(
183).
The brightness of the warning
triangle depends on ambient
brightness or, as applicable, on
the brightness of the instru-
ment cluster (
Setting lane change warning
Navigate to
Settings
, select
sist
In the factory setting, lane
change warning is active
by default. A change to the set-
ting is retained in memory after
the ignition is switched off.
The following settings are
available:
set-
82).
,
As-
.
LCW
: SWW is deactivated,
Off
neither notifications nor acute
warnings are issued.
: SWW is active, both noti-
On
fications and acute warnings
are issued.
Urgent only
ive, only acute warnings are
issued.
HILL START CONTROL (HSC)
Display
Symbol 1 is displayed in the
Pure Ride view or in the top
status line.
Switch Hill Start Control on or
off
Switch on the ignition.
(
93)
Navigate to
Settings
Vehicle settings
Switch
Hill Start Con-
on or off.
trol
121
: SWW is act-
,
.
Advertisement
Chapters
Table of Contents
