Hill Start Control (Hsc) - BMW Motorrad R 18 Rider's Manual

The system is deactivated.
Button 1 is disabled.

HILL START CONTROL (HSC)

with Hill Start Control
Display
Symbol 1 for Hill Start Control
is displayed in the Pure Ride
view and in the top status line.
Switch Hill Start Control on or
off
Switch on the ignition.
( 53)
Select SETUP. (
Repeatedly short-press but-
ton 1 or 2 until
displayed.
OE
46)
is
SET HSC
Long-press button 2 to call up
.
SET HSC
The setting currently selected
flashes.
Short-press button 1 or 2 to
change the setting.
The following settings are avail-
able:
: Hill Start Control is
HSC ON
activated.
: Hill Start Control is
HSC OFF
deactivated.
Long-press button 2 to con-
firm the setting.
Alternatively: Long-press but-
ton 1 to exit without saving
the setting.
Exit SETUP. (
Operating Hill Start Control
Requirement
Vehicle stationary and upright,
engine running. Hill Start Con-
trol is switched on.
ATTENTION
Non-availability of Hill Start
Control
Risk of accident
Apply the brakes manually
to hold the vehicle.
Hill Start Control is purely
a comfort system that
facilitates hill starts and con-
67
46)