118
OPERATION
Setting the lane change
warning
Go to
Settings
menu, select
In the factory setting, the
lane change warning is
active. A change to the setting
is retained after the ignition is
turned off.
The following settings are
available:
: SWW is deactivated;
Off
neither information warnings
nor acute warnings are out-
put.
: SWW is activated; both
On
information warnings and
acute warnings are output.
Urg. only
vated; only acute warnings are
output.
HILL START CONTROL (HSC)
Display
The icon 1 is displayed in the
Pure Ride view or in the upper
status line.
,
Assist
.
LCW
: SWW is acti-
Turn Hill Start Control on and
off
Turn on the ignition. (
Call up menu
hicle settings
Turn
Hill Start Control
on or off.
Operating Hill Start Control
Requirement
Vehicle is at a standstill with
the engine running.
ATTENTION
Failure of the Hill Start Con-
trol
Risk of accident
Secure the vehicle through
manual braking.
Hill Start Control is only a
comfort system to make
driving off on hills easier and
should therefore not be con-
fused with a parking brake.
91)
,
Settings
Ve-
.