Hill Start Control - BMW Motorrad K 1600 B Rider's Manual

Hill Start Control

with Hill Start Control
Operate Hill Start Control
ATTENTION
Switching off the engine or
ignition, extending the side
stand, timeout (approx. 20
minutes) or in the event of a
fault
Hill Start Control brake failure
It is essential to apply the
brakes manually to hold the
vehicle.
NOTICE
Hill Start Control is purely a com-
fort system to facilitate holding
the machine and pulling way
on uphill gradients and should
not be confused with a parking
brake.
OE
Operate the parking brake
lever 1 with force and once
again release it.
Telltale light for Hill Start
Control appears on the
display.
Hill Start Control has been ac-
tivated.
To switch off Hill Start Control
once again operate the parking
brake lever 1.
Or drive off in first or second
gear.
NOTICE
Hill Start Control is deactivated
automatically when the motor-
cycle pulls away.
General warning light
flashes yellow.
The holding symbol flashes
briefly.
Once the brake has been
fully released, the holding
symbol disappears.
Hill Start Control has been
switched off.
See the section "Engineering
details" for more information on

Hill Start Control.

Hill Start Control function
( 123)
4
83
z