Fuses - BMW Motorrad R 1300 GS Rider's Manual

Insert battery holder with ring
aerial 2 into mount 4, noting
the cable of the ring aerial.
Install screw 1.
Install cable strap 3.
Connect the battery to motor-
cycle. ( 228)
with anti-theft alarm (DWA)
If applicable, switch on the
anti-theft alarm.
Change the system settings.
( 82)

FUSES

Replacing fuses
Switch off the ignition.
Remove the rider's seat.
( 134)
Remove connector 1, con-
nector 2 or cap 3.
ATTENTION
Jumpering of blown fuses
Risk of short-circuit and fire
Never attempt to jumper a
blown fuse.
Always replace a defective
fuse with a new fuse of the
same amperage.
Replace faulty fuse in accord-
ance with the fuse allocation
diagram.
If fuse defects recur fre-
OE
quently have the electric
circuits checked by a specialist
workshop, preferably an au-
thorised BMW Motorrad re-
tailer.
Insert connector 1, con-
nector 2 or cap 3.
Install the rider's seat.
( 135)
231