Table of Contents
Advertisement
be fully released before another
gearshift with the Pro shift assist-
ant can take place. When shifting
gears with the Pro shift assistant,
the rider has to keep load state
(throttle grip position) constant
before and during the gearshift.
A change in the position of the
throttle grip during a gearshift
can cause the function to abort
and/or lead to a missed shift.
The Pro shift assistant provides
no assistance for the gearshift if
the rider declutches.
Downshifting
Downshifting is assisted until
maximum rpm for the target
gear to be selected is reached.
This prevents overrevving.
Maximum engine speed
-1
max 9000 min
Upshifting
Upshifting is only possible
when the current speed is
higher than the respective
release threshold of the next
higher gear.
This prevents the engine from
dropping below idle speed.
Idle speed
-1
1050 min
(Engine at regular
operating temperature)
Release thresholds
1st gear
min 1350 min
-1
2nd gear
-1
min 1400 min
3rd gear
-1
min 1450 min
4th gear
Release thresholds
-1
min 1500 min
5th gear
-1
min 1550 min
6th gear
-1
min 1600 min
Hill Start Control
(Hill Start Control)
Hill Start Control function
Hill Start Control assistant pre-
vents the motorcycle from rolling
backwards uncontrolled on gradi-
ents by intervening specific-
ally with the ABS brake system
without the driver having to con-
stantly operate the brake lever.
Pressure in the rear brake sys-
tem is built up when Hill Start
Control is activated in order to
keep the motorcycle stationary
on an incline.
8
163
z
Advertisement
Table of Contents
