Related Manuals for ATIKA RL 1400
Summary of Contents for ATIKA RL 1400
- Page 1 Handheld agitator Original instructions – Safety instructions – Spare parts RL 1400...
- Page 2 Sie dürfen das Gerät nicht in Betrieb nehmen, bevor Sie diese Betriebsanleitung gelesen, alle angegebenen Hinweise beachtet und das Gerät wie beschrieben montiert haben. Anleitung für künftige Verwendungen aufbewahren. Do not operate machine before having read the operating instructions, understood all the notes and assembly the machine as described here.
- Page 5 Risidual risks Vibrations (hand arm vibrations) herewith declare under our sole responsibility that the product Safe working Hand-Rührgerät (Handheld Agitator) type / model RL 1400 Description of device / spare parts Serial number: 010000 – 025000 Assembly is conform with the above mentioned EC directives as well as...
-
Page 6: Vibrations (Hand Arm Vibrations)
This machine must not be used − as a drilling machine or as a drive for other devices − for polishing, grinding, sharpening, engraving with any RL 1400: 5.67 m/s²; K = 1.5 m/s² attachments. Warning! The actual vibration emission level during the use of the •... -
Page 7: Electrical Safety
Store unused equipment in a dry, locked place out of the reach of children. Pass the safety instructions on to all persons who work Electrical Safety with the machine. Keep these safety instructions in a safe place. Design of the connection cable according to IEC 60 245 (H 07 RN-F) with a core cross-section of at least Follow the attached "General safety instructions". -
Page 8: Mains Connection
230 V with the mains voltage and connect the machine to Order-No. the relevant and properly earthed plug. Denomination Connect the machine via a 30 mA fault current safety RL 1400 switch. Agitator Do not use any defective connection cables. Mortar beater 372612 Use connecting or extension cables up to a length of 1.5 m... - Page 9 Only use beaters recommended by the manufacturer. Replacing the carbon brushes Pay attention the max. diameter:Ø 140 mm - RL 1400. The supplied mortar beater is suitable for materials with Replace the carbon brushes once they have been worn down tough and tenacious consistency: e.g.
- Page 10 ⇒ Cross- section of at least 2,5 mm2 in longer matically. tion, and cross-section of connection cables. lead too small. Type / Model RL 1400 Year of construction See last page Motor power P 1350 W MotorMotor AC-motor 230 V ~ 50 Hz Speed n 1.
- Page 11 Godina gradnje ATIKA GmbH Josef-Drexler-Str. 8, 89331 Burgau • Germany Tel.: +49 (0) 82 22 / 41 47 08 - 0 Fax: +49 (0) 82 22 / 41 47 08 - 10 E-mail: info@atika.de • Internet: www.atika.de 372663 – 03 11/14...