Triax TMB 1700 User Manual page 13

TMB 1700 programmable Amplifier

The devices meet the EU direc ves

The safety requirements are according to the standards EN/DIN EN 50083 resp. IEC/EN/DIN EN 60728 and
must be observed, especially concerning equipoten al bonding and earthing.

Observe the relevant country-specific standards, regula ons and guidelines on the installa on and opera on
of antenna systems.

Before star ng installa on or service work disconnect the receiving system from mains.

Installa on or service work should NEVER be undertaken during electrical / thunderstorms.

Avoid short circuits!

To ensure electromagne c compa bility, make sure all connec ons are ght and that the covers are screwed
on securely.

Take ac on to prevent sta c discharge when working on the device!

Due to the risk of fires caused by lightning strikes, we recommend that all mechanical parts (e.g. distributor,
equipoten al bonding rail, etc.) be mounted on a non-combus ble base. Wood panelling, wooden beams,
plas c covered panels and plas c panels are all examples of combus ble bases.
Do not expose the unit to rain or moisture.
-
Install the unit in a dry loca on without infiltra on or condensa on of water.
-
Do not expose it to dripping or splashing.
-
- Do not place objects filled with liquids, such as vases, on the apparatus.
- If any liquid should accidentally fall into the cabinet, disconnect the power plug.
Install the unit in a well aired loca on and keep a minimum distance of 15 cm around the apparatus for
-
sufficient ven la on
Do not place any items such as newspapers, tablecloths, curtains, on the unit that might cover the ven la on
-
holes.
Do not place any naked flame sources, such as lighted candles, on the apparatus
-
Do not install the product in a dusty place
-
Use the apparatus only in moderate climates (not in tropical climates)
-
Respect the minimum and maximum temperature specifica ons
-
Connect apparatus only to socket with protec ve earth connec on.
-
The mains plug shall remain readily operable
-
Pull out power plug to make the different connec ons of cables
-
- To avoid electrical shock, do not open the housing of adapter.
Maintenance
Only use a dry so cloth to clean the cabinet.
Do not use solvent
CAUTION
2011/65/EU, 2014/30/EU and
To prevent fire, short circuit or shock hazard:
To avoid any risk of overhea ng:
To avoid any risk of electrical shocks:
13
2014/35/EU.
EN