Backup, Restore And Factory Reset Of Organ Configuration (Backup/Restore Menu); What A Snapshot Contains - Viscount Cantorum Duo Plus Reference Manual

BACKUP, RESTORE and FACTORY RESET of ORGAN
CONFIGURATION (BACKUP/RESTORE menu)
The BACKUP/RESTORE menu contains functions to backup (save as .ALL file)
the entire organ configurations
reload it (or parts of it) into the internal memory and reset to the factory-set state of the
. Created backup files are also called "Snapshot".
entire organ settings
To access to this menu, in the main video page,
1. press the [MENU/ENTER] button,
2. place the cursor on the BACKUP/RESTORE (2nd page) field and press
[MENU/ENTER].
The BACKUP/RESTORE menu contains the following settings:
Function Description
Save Snapshot Save of the entire organ configuration (Pipe Sets, combinations, settings) in a USB flash drive.
Load Snapshot Load the entire organ configuration or single sections (Pipe Sets, combinations, settings) from a
USB flash drive.
Factory Reset Restore of the entire organ configuration (Pipe Sets, combinations, settings) to the factory-set state.
Restore Def.Setting Restore the instruments settings to the factory-set state.
NOTES
- Once the USB flash drive is inserted please wait some seconds before displaying the
BACKUP/RESTORE menu. If the instrument still does not detect the drive, showing "Warning: no USB
mem" on the bottom of the screen, press [EXIT] to leave the menu and then try again.
- When connecting a new or just formatted USB flash drive to the organ, the system will automatically
create two directories in the drive: "v_settings" and "v_songs". The system needs these two folders to
arrange files, and they must not be deleted or renamed, otherwise the saved files will be lost. The system
will save the organ configuration as .ALL file in the "v_settings" directory. Please pay attention not to
delete or rename this folder to avoid losing or making unusable the recordings.
- Always use USB flash drive formatted with FAT or FAT32 file system (no NTFS).

What a Snapshot contains

Below is the complete list of what a Snapshot contains:
Section Parameter
Pipe Sets All the pamaters contained in all the Pipe Sets
available in the instrument.
Pipe Sets Stop list.
Combinations All the combinations of all the Combination Sets
available in the instrument.
Combinations Combinations parameters
Settings External Volume, External Reverb parameters
Settings A.P. Mode
Settings ENC Config
Settings Swellboxes Steps
Settings Link Master Volume Pot. To
Settings Orchestra Couplers
Settings Audio parameters
(except Reverberation parameters)
Settings MIDI parameters
Settings LCD Contrast
Settings Auto Mainpage
Settings Sub Loud
Settings External outputs parameters
(Pipe Sets, combinations, settings) in a USB flash drive,
EN - 31
Backup, restore and factory reset of organ configuration
Display page
Available in the "Physis Plus The
Editor" application
SETUP / COMBINATIONS
LEVELS
SETUP / KEYBOARDS
SETUP / CONTROLS
SETUP / CONTROLS
SETUP / CONTROLS
SETUP / CONTROLS
SETUP / AUDIO
SETUP / MIDI
UTILITY
UTILITY
Available in the "Physis Plus The
Editor" application
Available in the "Physis Plus The
Editor" application
(Backup/Restore menu)
Explanation
page
10
12
26
14
23
25
25
25
25
27
29
34
34
Reference Manual