Thumb Pistons - Viscount Cantorum Duo Plus Reference Manual

Thumb pistons

7.
Orchestra pistons: pistons for activation and deactivation of orchestral voices.
- [ORCH PED]: orchestral voice of Pedal.
- [ORCH I]: orchestral voice of Manual I.
- [ORCH II]: orchestral voice of Manual II.
It is possible to select the voice activated by the stop and adjust the main sound generation parameters of
each voice. For further information see page 21.
8.
Couplers: here are the thumb pistons for the activation / deactivation of the couplers between the manuals
and the pedalboard:
- [I/P]: coupler of the first manual with the pedalboard
- [II/P]: coupler of the second manual with the pedalboard.
- [II/I]: coupler of the second manual to the first.
9.
[S]: piston to save general combinations, Tutti and Crescendo steps. To save a combination in the actual
memory bank:
1) Press and hold the [S] thumb piston.
2) Press the desired combination thumb.
3) Release the [S] thumb piston.
To save a combination in another memory bank,
1) Select the memory bank pressing [- -] then press two [0] / [9] pistons.
2) Press and hold [S].
3) Press [0] / [9] piston to select the combination to be saved.
For example, pressing pistons [2], [0] and [4] saves the combination 4 of the memory bank 20.
4) Release the [S] thumb piston.
To save a Crescendo step:
1) Select it through the [CRESCENDO] pedal.
2) Press and hold the [S] thumb piston.
3) Press [ENC] thumb piston.
4) Release the [S] thumb piston.
To copy the content of one Crescendo step to another:
1) Select the step you wish to copy.
2) Press and hold the [S] thumb piston.
3) Select the step in which you wish to paste the content.
4) Press the [ENC] thumb piston.
5) Release the [S] thumb piston.
EN - 5
General descriptions
Reference Manual