Yamaha QY-8 User Manual page 38

Creating an Accompaniment
• In the chord entry mode the [ [ [ [ [
DETAIL
• Chords can be entered on any eighth-note division of any
3-3. Select the desired chord root, type, and "on bass" note if necessary
(move the cursor to the appropriate section of the display and use
the [-1] and [+1] buttons to select).
On-bass settings are automatically cancelled whenever you change
a different chord root or type.
DETAIL
3-4. Press [ENTER] to enter the selected chord at the current location.
A dot will appear on the 1 MEASURE bar to indicate that a chord
has been entered at that location.
3-5. Repeat steps 3-2 through 3-4 until all required chord changes have
been entered.
The cursor must be located at the chord root or type (or on-bass
parameter) on the display in order to enter a chord change.
DETAIL
The "blank" chord root can not be selected during playback.
DETAIL
30
backward or forward in eighth-note increments when the cursor
is located at the 1 MEASURE pointer, and in quarter-note
increments when the cursor is in any other position. The [ [ [ [ [
j j j j j
and [ [ [ [ [ ] ] ] ] ] buttons step backward or forward in one-measure
increments when the cursor is located at the CHORD pointer.
measure.
h h h h h
] ] ] ] ] and [ [ [ [ [
D070000
/A0
j j j j j
] ] ] ] ] buttons step
h h h h h
] ] ] ] ]