Table of Contents
Advertisement
Programming the Sequencer Parts
6.
Start Recording
Press the [
you'll be given a two-measure count-in prior to the first measure actually
recorded. The count-in is also indicated by negative numbers below the
quantize parameter. If you're recording in 4/4 time, for example, the
count-in will run from beat "-08" to "-01", then recording will begin from
the specified measure number. Play the required material on your key-
board/controller when recording begins.
7.
Stop Recording When Done
Press the [
record mode will automatically be exited.
If the part selected for recording contains previously-recorded
data, the old data will be erased and replaced by the new data. If
you want record several separate parts to the same part (using
DETAIL
the same voice, of course), use the "Mix part" function (page 57)
to combine separately recorded parts.
46
; ; ; ; ;
t t t t t
/
] button to begin recording. The metronome will sound and
; t
; ; ; ; ;
t t t t t
/
] button to stop recording when you're done. The real time
Quant0
-05
Hide quick links:
Advertisement
Table of Contents
