Table of Contents
Advertisement
The Option Functions
7.
Use the [-1] and [+1] buttons to select the part to which you want
to copy the specified "copy-from" data: "P1" ... "P4" are parts 1
through 4.
The copy-to part parameter will automatically be selected if "ALL"
or "CHD" was selected for the copy-from parameter.
DETAIL
8.
Move the cursor down to the measure parameter and use the [-1]
and [+1] buttons to select the measure to which you want to copy
the data.
9.
Move the cursor across to the number of copies parameter and use
the [-1] and [+1] buttons to specify the number of times the data
is to be copied (1 ... 99).
10.
Press [ENTER] to copy the specified data. "Completed" will
appear briefly on the display and the Copy Measure function will
automatically be exited when the specified data has been copied.
You can exit without executing the Copy Measure function by
moving the cursor up to the OPTION pointer.
56
Cpy0to0
P2
Number of copies
Measure
Destination part
Hide quick links:
Advertisement
Table of Contents
