Table of Contents
Advertisement
Creating an Accompaniment
||:
:||
00
x02
¡–1
:||¡–2
||
32
Start repeat. Marks the beginning of a section of the song
which is to be repeated. Must be used in conjunction with an
end repeat (:||) mark, or first ending (
(:||
¡02
) marks. Automatically entered at the beginning of the
current measure when the [ENTER] button is pressed.
End repeat and number of repeats. Marks the end of a
section of the song which is to be repeated. Must be
used in conjunction with a preceding start repeat (||:)
mark. The "
" parameter can be set to specify any
x02
number of repeats from 2 to 99. When "X02" is selected,
for example, the section of the song between the "||:"
and ":||" marks is played twice (repeated once), then
the song continues until the next repeat section or the
end of the song. Automatically entered at the end of the
current measure when the [ENTER] button is pressed.
First ending. Used in conjunction with the second ending
mark (:||¡–
02
), below, and the start repeat mark (
The first time this mark is encountered the section following
it up to the second ending mark (:||¡–
normally, then playback returns to the preceding start repeat
mark (
). The second time the first ending mark (¡–
':
encountered the section between it and the second ending
mark (:||
) is skipped and playback continues from the
¡–02
measure following the second ending mark.
Automatically entered at the beginning of the current
measure when the [ENTER] button is pressed.
Second ending. See first ending, above.
End song. Marks the end of the song. Playback will stop at
this point even if other data is recorded after it. The end of
song mark does not have to be used with any other repeat
marks. Automatically entered at the top of the current
measure when the [ENTER] button is pressed (i.e. the song
actually ends after the preceding measure).
) and second ending
¡–1
), above.
||:
02
) is played through
) is
1
Hide quick links:
Advertisement
Table of Contents
