Yamaha QY-8 User Manual page 39

Deleting Chord Changes
To delete a chord change, move the cursor to the dot on the 1
MEASURE bar corresponding to the change you want to delete,
then press the [ENTER] button. An alternative method is to use the
h h h h h j j j j j
[ ] and [ ] buttons to locate the chord to be deleted, select the
"blank" chord (indicated by a row of flashing blocks), and press
[ENTER].
4.
Enter an End Mark and Repeats
4-1. Move the cursor to the REPEAT pointer ( ) to select the repeat
entry mode. Five different types of repeats can be entered at ap-
propriate points to control the flow of your song: start repeat, end/
number of repeats, first ending, second ending, and end song
(listed below).
h h h h h
4-2. Use the [ ] and [
want to enter an end mark or repeat, as indicated by the MEAS-
URE number on the display.
End marks and repeats will always be entered either at the
beginning or end of the selected measure (see below).
DETAIL
4-3. Select the desired end mark or repeat (move the cursor to the
repeat parameter — a row of flashing blocks will appear — and
use the [-1] and [+1] buttons to select).
Repeat0
j j j j j
] buttons to locate the measure at which you
Creating an Accompaniment
31