2: Copy Measure - Yamaha QY20 Owner's Manual

2:
Copy Measure
First measure in range to
be copied (001 ... 999).
Source track
m
(TR1 ... TR4, Chd).
m
Destination track
(TR1 ... TR4, Chd).
Measure to which source measures
are to be copied (001 ... 999).
ENTER
Press [ 1/NO ]
to cancel.
MUSICAL
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
Last measure in range to
be copied (001 ... 999).
– 1 + 1
NO YES
The Copy Measure job makes it easy to use phrases or even complete sections (an entire cho-
rus, for example) in more that one place in a song. You can copy a phrase played by one voice,
NOTE
and have it repeated by a different voice later in the song. You can always edit the copied sec-
tions to create variations.
7
Copies a specified range of measures from
one track to the specified measure in another
track. This operation overwrites the data from
the beginning of the specified destination
measure with the data from the source meas-
ure. Previous data in the overwritten measures
is therefore lost. If the "Chd" track is se-
lected, the corresponding chord progression is
copied.
Number of times specified range of
measures is to be copied (01 ... 99).
After setting the parameters as required,
press [ ENTER ] . "Are you sure?" will appear
on the display. Press [ +1/YES ] to confirm
that you want to go ahead with the Copy
Measure operation (Copy Measure is irrevers-
ible), or press [ 1/NO ] to cancel.
Creating a Complete Song
125