How To Start The Qy Data Filer - Yamaha QY-70 Owner's Manual

H o w t o s t a r t
t h e Q Y D a t a F i l e r
Z Start the QY Data Filer.
After installation (refer to page 1) and connection (refer to the
"Owner's Manual" on page 16) are completed, follow the instructions
below to start up the QY Data Filer.
• If you are using Window95
Click the "START" button, then click "QY Data Filer for Windows",
which is located in the "QY Data Filer" under the Programs menu.
• If you are using Windows3.1
Double click the "QY Data Filer for Windows" icon which is located
in the "QY Data Filer" group window.
• If you are using a Macintosh
Double click the "QY Data Filer for Mac" icon.
NOTE
• If you use the QY Data Filer on a Macintosh System, open the "Chooser" in the
"Apple Menu" and turn off "Apple Talk".
CAUTION
• If the MIDI Driver cannot be used with your computer, the following message will
be displayed.
"The selected MIDI device is in use. Quit any applications using the device."
Click "OK", then quit all other MIDI applications (sequencer software, etc.) that
use the MIDI driver, and start the QY Data Filer once again.
"Can't find the MIDI device. Confirm the MIDI device settings."
The MIDI driver is not properly installed. Refer to the "Owner's Manual" on page
19 and install the MIDI Driver.
CAUTION
• If the QY70 is not properly connected to your computer, "Data transfer failed.
Confirm QY70 connections (HOST SELECT switch, etc.)" dialog box will be
displayed. Properly connect the QY70, confirm the HOST SELECT switch position,
and start the software again.



 
5