Error Messages - Yamaha QY-70 Owner's Manual

22
E r r o r M e s s a g e s
"The selected MIDI device is in use. Quit any applica-
tions using the device."
When the QY Data Filer starts up and the MIDI driver is
currently being used by another application, this message is
displayed.
Click "OK", quit any applications that are using the MIDI
driver, and start the QY Data Filer again.
"Can't find the MIDI device. Confirm the MIDI device
settings."
Refer to the procedures on page 19 in the "Owner's Manual",
install the MIDI driver, and properly select the COM port, etc.
"Data transfer failed. Confirm QY70 connections (HOST
SELECT switch, etc.)."
Confirm the following points and try the operation again.
• Is the QY70 properly connected to the computer?
Follow the instructions on page 16 in the "Owner's Manual"
and make the proper connections.
• Is the QY70's AC adaptor connected?
Follow the instructions on page 11 in the "Owner's Manual"
and make the proper connections.
• Is the QY70's POWER switch turned OFF?
Switch the POWER ON.
• Is battery power low?
Replace the old batteries with a fresh set of batteries.
• Is the QY70's HOST SELECT switch properly set?
Follow the instructions on page 17 in the "Owner's Manual"
and make the proper settings.