Installing The Qy Data Filer; For Windows Users - Yamaha QY-70 Owner's Manual

t h e Q Y D a t a F i l e r
To use the QY Data Filer, follow the instructions below to install
the Data Filer software from the floppy disk (QY Data Filer) to your
computer.
To install the QY Data Filer for Windows, the following system is
reguired:
Operating System
CPU
Memory
Hard Disk
Display
Z Insert the "QY Data Filer for Windows" floppy disk into your
computer's disk drive.
X If you are using Windows95, click the START button, then
click the "Run".
(If you are using Windows3.1, select "Run" from the Program
Manager's File menu.)
C Use the keyboard to enter the name of the floppy drive
holding the floppy disk, and the file name (setup.exe).
• If you are using an IBM-PC/AT compatible computer,
• If you are using an NEC9801/9821 series computer,
From this point, follow the commands that appear on your
computer's display to carry out the installation operation.
NOTE
• If you are using Windows 3.1 or Windows95, it will be necessary to install the
"MIDI driver" before you use the QY Data Filer as well as installing the QY Data
Filer itself. Refer to the "Owner's Manual" on page 19 to install the MIDI driver.
I n s t a l l i n g

For Windows Users

Windows 95 or Windows 3.1
80486 sx/33MHz or faster
8MB or more
3MB or more
640 x 480 dots, 256 or more colors
enter "A:\setup.exe" and click "OK".
enter "B:\setup.exe" and click "OK".



 
1