Table of Contents
Advertisement
Safety instructions and measures
WARNING
!
Risk of personal injury due to pressurized components and as a result of process
medium being discharged.
Incorrect opening of pressure equipment or mounting parts may lead to the process
medium escaping to the atmosphere.
Î Do not unscrew the control line while the valve is pressurized.
Î Do not start up the regulator until all parts have been mounted.
Risk of burn injuries due to hot or cold components and pipelines.
Depending on the process medium, regulator components and pipelines may get very
hot or cold and cause burn injuries.
Î Allow components and pipelines to cool down or warm up to the ambient tempera-
ture.
Î Wear protective clothing and safety gloves.
Damage to health relating to the REACH regulation.
If a SAMSON device contains a substance listed as a substance of very high concern
on the candidate list of the REACH regulation, this is indicated on the SAMSON deliv-
ery note.
Î Information on safe use of the part affected u www.samsongroup.com/en/
about-samson/environment-social-governance/material-compliance/.
Risk of personal injury due to residual process medium in the regulator.
While working on the regulator, residual process medium can escape and, depending
on its properties, may lead to personal injury, e.g. (chemical) burns.
Î If possible, drain the process medium from the plant sections affected and from the
regulator.
Î Wear protective clothing, safety gloves and eye protection.
1-6
EB 3124 EN
Advertisement
Table of Contents
