Yamaha PLG150-DX Owner's Manual page 72

Receive DX Bulk Dump Data
This is used for importing DX voice data from a DX7 or DX7II. All current settings will be
replaced by the received data.
• Receive Method
1 Voice
When this is selected, only the data for one voice will be received. This data is loaded
into the edit buffer (temporary memory storage).
• Make sure to store the received voice after executing this operation. Otherwise the data will
be lost upon selecting a different voice.
All Voices
When this is selected, the data for 32 Custom voices will be received. Select the
desired memory bank of voices (1 - 32 or 33 - 64) from the combo box at the right.
• Receive DX Bulk Dump
Start
Click this to start reception of the data. The progress bar indicates how much data has
been received. When the bar is completely filled, all data has been received.
• OK
Click this to exit from the dialog box once all data has been received.
Setup Menus /
72
Receive DX Bulk Dump Data